-
3M Acrylic Plus Tape PT1100 PT1000 PT1500 for Automotive Exterior Attachment
The 3M PT1000 Acrylic Foam Tape Series are made from a black acrylic foam then coated with formulated acrylic adhesives for high adhesive build rates, particularly suitable for attaching automotive components. It features two adhesives, and non liner side adhesive desigin with special properties produce a high adhesion on some tough surfaces.
• 3M Acrylic Foam Adhesive Tapes can compensate stress due to their unique viscoelasticity. In contrast to foam adhesive tapes (PE, PU adhesive tapes), they can cope with significant elongation differences between substrates in case of temperature changes.
• Easy to use: The tape can be easily processed in multiple ways to cut and to apply.
• Immediate initial adhesion: The initial adhesion allows immediate further processing without temporary support or fixtures.
• Freedom of design: enables the easy differentiation of vehicle models through modified trim attachments without change of the body configuration.
• Sealing and damping properties: positive improvement of NVH properties.
-
3M 55280 Double Coated Adhesive Tape With Thick PVC Film for Automotive Rearview Mirror
3M 55280 is double coated tape with a thick PVC film improved handling with ease of die cutting and laminating. The high tack adhesive provides relatively high initial adhesion and good shear holding power to a variety of surfaces, at the same time, it has good vibrating resistance ability. It’s widely used for plastic film lamination, bonding,splicing, mirror attachment etc. It can be pasted on various surfaces withstand heavy loading, and teared off without leaving residue. It is always for household or automotive usage. With log roll size of 1220mm*50m. Custom roll size and die cut size are both available.
-
3M 9703 Electrically Conductive Adhesive Transfer Tape for LCD PCB Screens interconnection
3M 9703 electrically Conductive Adhesive Transfer Tape (ECATT) is a pressure sensitive adhesive (PSA) transfer tape with anisotropic electrical conductivity.
It’s part of a family of anisotropic (Z-Axis) conductive tapes and thermoset films. For applications where mechanical clamping is not desired, or where improved electrical, thermal and mechanical performance is required, these alternative products should be considered.
The PSA matrix is filled with conductive particles which allow interconnection between substrates through the adhesive thickness (the “Z-axis”) but are spaced far enough apart for the product to be electrically insulating in the plane of the adhesive.
The PSA tack properties and lack of any thermal curing make 3M ECATT 9703 easy to use in assembly operations. 3M ECATT 9703 electrically connects and mechanically bonds medium pitch flexible circuits with other flexible circuits (flex), rigid printed circuit boards (PCB) or LCD screens. 3M ECATT 9703 is electrically conductive and offers good adhesion to common PCB substrates such as copper, gold, FR-4 epoxy, DuPont polyimide and polyester films, can also be applied as die cut parts or in roll form and has good adhesion to common EMI/RFI substrates such as aluminum, stainless steel, and smooth gasket materials.
Stable electrical performance in any flexible circuit interconnection application may require mechanical reinforcement (clamping).
3M ECATT 9703 also electrically connects and mechanically bonds EMI/RFI shield and gaskets to metal frames and enclosures. The low contact resistance and tape construction result in good EMI performance.
-
Double Side 3M 5423 UHMW Film Tape for Spray Booth Liners
3M 5423 is a double-sided transparent UHMW tape with a abrasion resistant backing that protects the surface from wear. 3M UHMW PE Film Tape 5423 is a thick caliper universal polyethylene tape that produces a “sliding surface” effect, making contact fray-free while reducing the squeaking caused by movement, ideal for the use because of contamination and non-lubricated applications. The effectiveness of 3M 5421 UHMW-PE film tape mainly lies in its Ultra-High Molecular Weight Polyethylene (UHMW-PE) backing, and UHMW-PE is a thermoplastic that has a unique combination of properties, such as exceptional hardness and low surface energy. 3M UHMW-PE Film Tape 5423 is a thicker version of 3M UHMW-PE Film Tape 5421.
-
High Adhesion 3M 9471LE 300LSE Adhesive Transfer Tape for Components Assemble
3M 9471LE, double coated with 300LSE2 mil (0.05 mm) acrylic adhesive, is a versatile, market proven transfer tape on a release liner. The transfer adhesive tape is usually for indoor and outdoor use that features high viscosity and high adhesion, making it suitable for bonding on different substrates. 3M 9471LE adhesive provides excellent retention and resistance to lift and fall, making it the ideal solution for general purpose accessories and components in a variety of materials. It also has good resistance to industrial chemicals, consumer chemicals, moisture and humidity, meeting a wide variety of automotive and OEM specifications.
-
3M 4229P Dark Gray Acrylic Foam Tape for Automotive Exterior Attachment
3M 4229P Acrylic Foam Tape, also named automotive foam tape, is a medium-density, dark gray acrylic foam tape with high performance acrylic adhesives. 3M acrylic foam tape 4229P is characterized by high performance peel and shear adhesion, high internal strength, good conformability and excellent plasticizer resistance.
It features two adhesives, one on each side of a 0.76 mm acrylic foam core, designed for robust performance and shear strength on automotive surfaces such as clear coats. The liner side adhesive is formulated for high initial and final adhesion to rigid clear coat systems. The non liner-side adhesive works on plastics and other common trim materials.
This tape is designed for attaching a range of trim and components to clear coat systems. It is well used on all parts, especially plastics such as RIM, TPO, PPO, PP and PC.
-
Excellent Chemical Resistance 3M 9485PC Adhesive Transfer Tape for Bonding Foams to LES materials
3M 9485PC is a double-sided transfer tape suitable for indoor and outdoor use, and leverages the power of 3M High Performance Acrylic Adhesive 350. 3M 9485 has 3M 9485PC and 3M 9485EK. PC refers to the release Paper as Polycoated Kraft Paper, and EK refers to Extensible Polycoated Kraft Paper for release paper color white. 3M 5952 has very good performance for chemical resistance and shear and peel strength even at elevated temperatures. It can be applied to short term temperature exposure up to 450°F (232°C) and long term 300°F (149°C).5.0 mils (.127 mm) thick tape provides high bond to low surface energy substrates and powder coated paints. It is a fiber reinforced adhesive, a feature that is important for roll stability in narrow widths. This tape is ideal for joining materials that have rougher surfaces.
-
High Abrasion Resistant 3M 5421 UHMW Film Tape for Surfaces Protecting
The 3M UHMW 5421 polyethylene tape is used to protect the surface from abrasion and is a thin universal polyethylene caliper tape that creates a “slipping surface” effect so that contact surface doesn’t get worn out. The effectiveness of 3M 5421 UHMW-PE film tape mainly lies in its Ultra-High Molecular Weight Polyethylene (UHMW-PE) backing, which significantly reduces friction to create an effective solution for anti-stick and easy-release requirements. The tape has a unique combination of properties that makes it ideal for many heavy impact or sliding applications. 3M UHMW-PE Film Tape 5421 is a thinner version of 3M UHMW-PE Film Tape 5423.
-
TESA 51910 & TESA 51780 Flying Splice Tape Analogue for Paper Printing Industry
Tesa 51910 and Tesa 51780 are multifunctional flying splice tape which has been widely applied on paper printing industry. After years of research, GBS has successfully developed the Tesa Analogue Flying Splice tape, which can replace several Tesa’s splicing tape like Tesa51910, Tesa51780, Tesa 61170, etc,.
Our flying splice tape is a combined paper splicing tape, which is composed of a single side and partial double sides adhesive. We use heat resistant flat paper as carrier and coated with high temperature adhesive, which can pass through 200 ℃ oven smoothly. It has very high tack adhesion to any paper or film and no need to reduce the speed when changing rolls. The joint thickness is very thin and there is no bounce through each pressure zone, so it does not need to be opened to pass smoothly. The back is designed with a positioning strip, which is convenient for positioning and can be quickly separated when splicing paper and the positioning and layering force is stable which is not easy to fall off during pre-acceleration process.
-
Wholesale Decompression Sticky Ball Tape for DIY Rainbow Ball Toy
Adhesive Sticky Ball Tape is a popular, easy-to-stress adhesive tape toy for reducing pressure in entertainment.
The adhesive of this sticky ball tape is specially designed to make it easier to stick, while it is still more difficult to make a sticky ball, which requires a certain degree of patience and concentration. But, once you master it, you will feel the joy of using it. With tapes of various colors, you can glue balls of various colors. You can also invite friends to join in, which will bring you more fun in your life.
-
TESA 51914, TESA51913, TESA51915, TESA51917 Repulpable Tesa Flying Splicing Tape for Paper Printing Industry
TESA is very famous in providing various flying splice tape for paper printing industry. Among the Flying splice family, repulpable double-sided splicing tape is one of the most common and wide application splice tape. The series includes TESA 51914, TESA51913, TESA51915, TESA51917, and they uses non-woven as backing and is coated with repulpable tackified acrylic adhesive. The thickness ranges from 50um to 120um. They have great adhesion values on coated and uncoated papers, and also excellent shear strength and good epulpability over full pH-range (pH3–pH9). They’re usually used as flying splices in the paper producing and paper converting industries.
-
High Heat Kapton Poylimide Tape for PCB Processing
GBS Kapton polyimide tape uses polyimide film as substrate coated with single side or double side high performance organic silicone adhesive. Capable of wide temperature range from -260°(-452°F ) to 260°(500°F), such high heat polyimide tape can be used in high temperature working temperature on printed circuit boards during wave solder or reflow soldering, SMT surface mounting, Transformer manufacturing, as well as lithium battery positive and negative and ears fixed. It has been widely used in Aerospace, aviation, marine, spacecraft, missile, rockets, atomic energy, electrical and electronic industry and other fields.
Color options: Amber, Black Red
Polyimide film thickness options: 12.5um, 25um, 35um, 50um, 75um. 100um, 125um.
Available roll size:
Max width: 500mm(19.68inches)
Length: 33meters
- English
- French
- German
- Portuguese
- Spanish
- Russian
- Japanese
- Korean
- Arabic
- Irish
- Greek
- Turkish
- Italian
- Danish
- Romanian
- Indonesian
- Czech
- Afrikaans
- Swedish
- Polish
- Basque
- Catalan
- Esperanto
- Hindi
- Lao
- Albanian
- Amharic
- Armenian
- Azerbaijani
- Belarusian
- Bengali
- Bosnian
- Bulgarian
- Cebuano
- Chichewa
- Corsican
- Croatian
- Dutch
- Estonian
- Filipino
- Finnish
- Frisian
- Galician
- Georgian
- Gujarati
- Haitian
- Hausa
- Hawaiian
- Hebrew
- Hmong
- Hungarian
- Icelandic
- Igbo
- Javanese
- Kannada
- Kazakh
- Khmer
- Kurdish
- Kyrgyz
- Latin
- Latvian
- Lithuanian
- Luxembou..
- Macedonian
- Malagasy
- Malay
- Malayalam
- Maltese
- Maori
- Marathi
- Mongolian
- Burmese
- Nepali
- Norwegian
- Pashto
- Persian
- Punjabi
- Serbian
- Sesotho
- Sinhala
- Slovak
- Slovenian
- Somali
- Samoan
- Scots Gaelic
- Shona
- Sindhi
- Sundanese
- Swahili
- Tajik
- Tamil
- Telugu
- Thai
- Ukrainian
- Urdu
- Uzbek
- Vietnamese
- Welsh
- Xhosa
- Yiddish
- Yoruba
- Zulu
- Kinyarwanda
- Tatar
- Oriya
- Turkmen
- Uyghur