• Ekwentị: +86-13400652499
  • Email: fanny.gbs@gbstape.com
    • English

    Eke Eke Rubber Adhesive Tape

    • GBS teepu
    Dị ka otu n'ime atọ nrapado ụdị usoro, eke roba nrapado teepu ka ọtụtụ ebe etinyere na dị iche iche ụlọ ọrụ dị ka Home Appliance, Automotive ụlọ ọrụ, Electronic & Electric ụlọ ọrụ, wdg. E jiri ya tụnyere acrylic adhesive, eke roba nrapado bụ acid na alkali na-eguzogide ọgwụ, mgbochi corrosion, UV mgbochi na ndị ọzọ ịka nká.The viscosity kwụsiri ike na-adịghị na-abawanye mgbe rapaara, na ọ nwere ike dị mfe bee na-enweghị ihe fọdụrụ gluu n'elu na ọ dịghị mkpọtụ mgbe ebipụ ya.E wezụga na, Natural roba nrapado nwere ike ntekwasa dị iche iche na-ebu fim dị ka PVC Film, PE Film, MOPP Film, Polyester PET Film, BOPP Film, Cotton Cloth, wdg GBS na-etinye onwe anyị na-enye a zuru ezu usoro nke eke roba nrapado teepu izute zuru ezu usoro nke eke roba nrapado teepu izute. ụlọ ọrụ mmepụta ihe chọrọ.
    • Omenala Die Cut Anti Skid Silicone/ Mpempe rọba / mpempe akwụkwọ maka akara, ịkwa akwa na ịtinye gas.

      Omenala Die Cut Anti Skid Silicone/ Mpempe rọba / mpempe akwụkwọ maka akara, ịkwa akwa na ịtinye gas.

      Ihe mgbochi skid silicon / rọbabụ nke siri ike silicone roba ihe nke bụ ụdị vasatail ihe na-enye ọtụtụ Njirimara dị ka mgbochi ileghara, eyi-eguzogide, shockproof, mgbochi nkukota, wdg Ọ na-emekarị laminated na 3M abụọ n'akụkụ nrapado teepu na-anwụ anwụ na square udi, gburugburu udi. ma ọ bụ ihe ọ bụla ọzọ shapes dị iche iche ngwa.Enwere ike iji ya dị ka mpempe ụkwụ mgbochi mgbochi na arịa ụlọ, ihuenyo ngosi, ngwa nbipute, ngwa ụlọ wdg, iji chebe ha ka ọ ghara ịcha na ịpụ.E wezụga nke ahụ, a pụkwara iji mpempe akwụkwọ rọba silicone ma ọ bụ ibe dị ka nkwụsịtụ, nkwụsịtụ na ọrụ mgbochi na-amị amị na ụlọ ọrụ metal na plastik, ụlọ ọrụ igwe, ụlọ ọrụ iko, na ihe ngosi ndị ọzọ.Enwere ike ime ka agba pụta ìhè ma ọ bụ agba ndị ọzọ dị ka ọcha, nwa, acha anụnụ anụnụ, ọbara ọbara, akwụkwọ ndụ akwụkwọ ndụ, oroma, wdg, dị ka arịrịọ.

      Ọkpụrụkpụ dị site na 0.2mm ruo 6mm dị ka ngwa ahịa si dị.

      ajujunkọwa
    • Mpempe ntụpọ Silicon na-adịghị mma nke na-adịghị na-amị amị maka ijide ndebiri na ndị na-achị achị n'ebe.

      Mpempe ntụpọ Silicon na-adịghị mma nke na-adịghị na-amị amị maka ijide ndebiri na ndị na-achị achị n'ebe.

      Anyị transperent mgbochi slipSilicone Sticky Dotbụ nke a haziri nke ọma iji jide template ma ọ bụ onye na-achị gị ka ị ghara ịfefe mgbe ị na-eji onye na-egbutu rotary, ya mere ịkpụ ahụ dị nchebe, ziri ezi na nke zuru oke zuru oke.A na-eji ihe silicone na-ahụ anya wee jiri nrapado 3M467 kwadoo ntụpọ ahụ, yabụ agaghị emetụta ọhụhụ ọrụ gị.E wezụga nke ahụ, site na nrapado nke onwe ya na-akwado, ntụpọ njide nwere ike ịrapara n'ọtụtụ elu dị ka ákwà, akwa, akwụkwọ, na ihe ndị ọzọ.Ọ dị mfe iji, naanị na-etinye ntụpọ ahụ n'azụ ndị ọchịchị ma ọ bụ ndebiri gị, wee dọkasịa ha na-enweghị ihe fọdụrụ mgbe ị na-achọkwaghị ha.

      Anyị nwere ike ịnwụ bee ma shapes na gburugburu diski ma ọ bụ square ibe na a nnukwu mpempe akwụkwọ na onye ọ bụla na-ebu ya na ahaziri logo, ọ bụla nnukwu mpempe akwụkwọ na-enwekarị nke 24pcs nnukwu ntụpọ na 24pcs obere ntụpọ maka gị dị iche iche ngwa.

      ajujunkọwa
    • Ihe nkiri ihe nkiri PVC na-acha anụnụ anụnụ maka teepu nchekwa oghere maka nchekwa oghere anya

      Ihe nkiri ihe nkiri PVC na-acha anụnụ anụnụ maka teepu nchekwa oghere maka nchekwa oghere anya

      oghere anyịIhe nchekwa dị n'eluemebere ya nke ọma iji chebe elu oghere n'oge a na-emepụta oghere RX dị ka ịkpụ, polishing na egweri.Ọ nwere ike na-enyere aka nke ọma igbochi ncha ma ọ bụ irighiri ihe na-emebi oghere n'oge usoro mmepụta.Ihe nchekwa nchekwa elu na-eji ihe nkiri PVC na-acha anụnụ anụnụ na-agbanwe agbanwe dị ka onye na-ebu, nke dị mfe ịmata ọdịiche maka iwepụ mgbe usoro ahụ gasịrị, wee kpuchie ya na nrapado roba eke na-enye nkwado dị elu na oghere na obere torque iji hụ na njedebe ziri ezi.Enwere ike ihichapụ ya dị ọcha na ngwa ngwa site na oghere mgbe ewepụsịrị ya na-ahapụghị ihe ọ bụla ma ọ bụ ghosting na oghere.Enwere ike itinye teepu ihe nkiri PVC anyị na lens kamakwa iko na ihe ndị ọzọ na-emepụta ihe.

      ajujunkọwa
    • Ihe nkiri ihe nkiri PVC na-acha akwụkwọ a na-ebipụta akwụkwọ nwere ike ibipụta teepu maka akpa Poly akpa na nchikota

      Ihe nkiri ihe nkiri PVC na-acha akwụkwọ a na-ebipụta akwụkwọ nwere ike ibipụta teepu maka akpa Poly akpa na nchikota

        

      Ihe nkiri PVC nke agba anyịAkpa olu sealer teepuemebere ya nke ọma maka ịchichi, ịgbakọ na ijikọ akpa poly na nnukwu ahịa, ụlọ ahịa nri, ụlọ ahịa bred, ụlọ ahịa swiiti, na ụlọ ahịa ifuru, wdg.

      Ọ na-eji PVC na-agbanwe agbanwe dị ka ihe nkiri ihe na-ebu ma kpuchie ya na nrapado rọba eke.Ọ nwere nnukwu tack mbido yana ezigbo nrapado ka a ga-agbaso ya n'elu elu dị iche iche, dị ka ma polar na elu elu.Teepu mkpuchi akpa anyị na-adịgide adịgide yana nguzogide mmiri yana dịkwa mfe iji ihe na-ekesa akpa akpa iji jide akpa poly iji gbochie ihe ndị dị n'ime akpa poly ka ọ ghara imebi na rere ure.Ihe mkpuchi akpa PVC anyị nwere ike mechie polyethylene na akpa ihe nkiri ndị ọzọ dị ka nkwakọ ngwaahịa, ihe eji eme bred, akara akwụkwọ nri, candies ma ọ bụ akụkụ ụlọ ọrụ mmepụta ihe, wdg.Site na akụrụngwa mara mma na nke a na-ebipụta, enwere ike iji teepu mkpuchi akpa PVC anyị mee akara na ntinye koodu.

      ajujunkọwa
    • Ihe nkiri mkpuchi mkpuchi Black&White PE Laser maka nchekwa igwe anaghị agba nchara

      Ihe nkiri mkpuchi mkpuchi Black&White PE Laser maka nchekwa igwe anaghị agba nchara

        

      PE anyịIhe nkiri Nchebe Ịkpụcha Laseremebere ya nke ọma iji kpuchido elu igwe anaghị agba nchara ka ọ ghara ịkpụcha ya ma mebie ya n'oge a na-emepụta ịcha laser, ntinye ma ọ bụ njem.Ihe nkiri laser na-eji ihe nkiri polyethylene gburugburu ebe obibi dị ka ihe na-ebu ma kpuchie ya na nrapado roba eke.Enwere ike itinye ya n'elu mirror, gbawara agbawa ma ọ bụ ájá, yana 3D ndị ọzọ ma ọ bụ n'akụkụ akụkụ ma na-enye nkwado siri ike na elu.Ihe kachasị mkpa bụ mgbe a kpochapụrụ ihe nkiri ahụ, elu ahụ kwesịrị ịnọgide na-adị ọcha nke ọma na emetụghị ya aka.GBS na-enwe ike hazie ma n'etiti na elu adhesion dị ka ndị ahịa chọrọ ma nyekwa akụ obibi akwụkwọ na ọnyà iji nyere aka chọpụta ntụziaka na-egbuke egbuke maka ihe nkiri laser igwe anaghị agba nchara.

       

      ajujunkọwa
    • Igwe mkpuchi mkpuchi PVC dị elu nke dabara na 3M 4737 na Tesa 4174/4244

      Igwe mkpuchi mkpuchi PVC dị elu nke dabara na 3M 4737 na Tesa 4174/4244

        

      Anyị elu okpomọkụ Fine LineIhe mkpuchi PVCdabara na 3M 4737, Tesa 4174 na Tesa 4244, nke emebere nke ọma maka akụkụ sara mbara na nkewa agba kwụ ọtọ na eserese ụgbọ ala.Ọ na-eji ihe nkiri PVC na-agbanwe agbanwe na nke na-adịgide adịgide dị ka ihe na-ebu ma kpuchie ya na nrapado rọba eke.The teepu nwere magburu onwe atụmatụ na elu okpomọkụ iguzogide (ihe dị ka 150 ℃) maka 3 awa, na ike mfe peeled apụ na-ahapụghị residues na ahu.Ọ na-nwere nnọọ ike bee nrapado na ezi conformity na-rapara na ma ire ụtọ ma ọ bụ na-ezighị ezi na-ebupụta na-enye magburu onwe agba akara nkewa na masking na elu okpomọkụ akpaaka eserese Filiks.

      ajujunkọwa
    • Mpempe mpe mpe akwa ewepụghị ihe mkpuchi mkpuchi maka nchekwa ihe osise akpaaka

      Mpempe mpe mpe akwa ewepụghị ihe mkpuchi mkpuchi maka nchekwa ihe osise akpaaka

        

      GBSMpempe mpe mpe akwa ewepụghị ihe mkpuchidabara na 3M 06349, nke a haziri ahazi maka ịgbasa eserese akpaaka nke na-echekwa nchekwa na ndozi ụgbọ ala aftermarket.The perforated imewe na teepu na-enye ohere ịdọka ngwa ngwa site n'aka na-enweghị ngwá ọrụ na ewepụtụ masking teepu nwere a isiike gbalaga na nsọtụ nke nwere ike dịtụ ebuli na fanye n'ime zoro ezo agba n'ọnụ nke mkpụbelata.Teepu a na-enye ohere ka eserese na-asọba n'okpuru ihe a na-akpụ akpụ mgbe ha na-ekpuchi anya ha na-ewepụghị ma ọ bụ dochie ihe akpụ akpụ ma ọ bụ rụgharịa maka ahịrị agba.

       

      ajujunkọwa
    • Teepu Ngwa Polypropylene anaghị agba nchara maka nchekwa ngwa ụlọ

      Teepu Ngwa Polypropylene anaghị agba nchara maka nchekwa ngwa ụlọ

        

      Ụlọ anyịNgwa teepuna-eji polypropylene tensilized na-adịgide adịgide dị ka onye na-ebu ma kpuchie ya na enweghị ntụpọ, nrapado eke eke na-enweghị ntụpọ.Emebere ya nke ọma maka iji ngwa, akụrụngwa kọmpụta ụlọ ọrụ, ndị na-ebi akwụkwọ ọfịs, arịa ụlọ, iji nye njide na nchekwa n'oge njem.Ọ nwere ike ichebe elu site na nchacha na mebiri emebi.Site na ike ike siri ike na elongation dị ala, teepu polypropylene nwere ike ijidesi ike ma jide ngwa ahụ.E wezụga nke ahụ, enwere ike ịpụpụ ya ngwa ngwa n'enweghị ịhapụ ihe ọ bụla n'elu.N'ebe a, anyị nwere agba anọ maka nhọrọ: ọcha, acha anụnụ anụnụ, ọchịchịrị anụnụ anụnụ na agba aja aja.

       

      ajujunkọwa