GBS High zafin jiki kaset suna yafi shafi aiki na Aerospace masana'antu, Electric & Electronic masana'antu, Foda shafi / zanen masana'antu, da dai sauransu, tare da aiki zafin jiki resistant zuwa 300 ℃, GBS zafi juriya kaset sun hada da Polyimide kaset, PET Silicone tef, PTFE Teflon tef, Gilashin zane silicone tef, waɗannan kaset ɗin za a iya jujjuya su zuwa sassa daban-daban na mutuwa kamar yadda ake buƙata daban-daban daga abokin ciniki.
-
Babban Heat Kapton Poylimide Tef don Gudanar da PCB
GBSKapton polyimide tefyana amfani da fim ɗin polyimide azaman mai rufi tare da gefe ɗaya ko gefe biyu babban aikin mannen silicone.Ikon kewayon zafin jiki mai faɗi daga -260°(-452°F) zuwa 260°(500°F), ana iya amfani da irin wannan tef ɗin polyimide mai zafi mai zafi a cikin babban zafin jiki na aiki akan allunan da'ira da aka buga a lokacin siyar da igiyar ruwa ko reflow soldering, SMT surface hawa, Transformer masana'anta, kazalika da lithium baturi tabbatacce da korau da kuma kunnuwa gyarawa.An yi amfani da shi sosai a sararin samaniya, jiragen sama, ruwa, jiragen sama, makamai masu linzami, roka, makamashin nukiliya, masana'antar lantarki da lantarki da sauran fannoni.
Zaɓuɓɓukan launi: Amber, Black Red
Zaɓuɓɓukan kauri na fim ɗin polyimide: 12.5um, 25um, 35um, 50um, 75um.100, 125 um.
Girman juyi akwai:
Matsakaicin nisa: 500mm (19.68inci)
Tsawon: 33m
-
Mutu Yankan Nomex Insulation Paper Nomex 410 don Rufin Masana'antar Lantarki
DupontFarashin 410wani abu ne na musamman na aramid wanda aka haɓaka cellulose, wanda ya ƙunshi babban ingancin wutar lantarki na ɓangaren litattafan almara.Daga cikin dangin Dupont Nomex, Nomex 410 wani nau'in samfuri ne mai girma da kuma babban ƙarfin dielectric na zahiri, taurin inji, sassauci da juriya.Yana da nau'i daban-daban na kauri daga 0.05 mm (mil 2) zuwa 0.76 mm (mil 30), tare da takamaiman nauyin nauyi daga 0.7 zuwa 1.2.Yana nuna ƙarfin juriya na zafin jiki da ingantaccen ƙarfin dielectrical, Nomex 410 za a iya amfani da shi ga yawancin masana'antar lantarki, kamar rufin wutan lantarki, babban ƙarfi, matsakaicin ƙarfin lantarki da rufin masana'antar wutar lantarki mai ƙarfi, insulation motors, rufin baturi, wutar lantarki, da sauransu,.
-
Copper Clad Polyimide Film Single Side FCCL Sheet don Majalisar FPC
Copper Clad Polyimide Filmyana amfani da fim ɗin amber ko baƙar fata polyimide azaman fim ɗin tushe kuma an yi shi da tef ɗin tagulla.Yawancin lokaci ana amfani da shi tare da fim ɗin murfin thermosetting akan masana'antar allon da'irori masu sassauƙa, yana nuna kyakkyawan juriyar zafin jiki da aikin rufewa.The soldering juriya zafin jiki ne 288 ℃ ba tare da kumfa da delamination.Muna da cikakkun samfuran samfuran PI tushe FCCL da polyimide thermosetting coverlay da polyimide stiffener sheet, wanda zai iya samar da mafita na ƙwararru don taron hukumar FPC ko sauran juriya mai zafi da masana'antar masana'anta na lantarki.
-
Tef ɗin Kapton Side Biyu don Ƙirƙirar Abubuwan Kayan Lantarki
Tef ɗin polyimide na gefe biyu yana amfani da fim ɗin polyimide azaman mai ɗaukar hoto tare da mannen siliki na gefe biyu.Ana iya amfani dashi ko'ina a cikin masana'antar lantarki, masana'antar kera, SMT Surface kayyade, sarrafa batirin lithium.
Ana samun kauri daga 50um-175um kamar yadda ake buƙata ta abokin ciniki.
Girman gabaɗaya shine faɗin 500mm da tsayin mita 33.
Bayan haka,Single Side Kapton TefkumaFim ɗin Kapton ba tare da mannewa bayana samuwa.
-
Fim ɗin PTFE teflon mai jure zafin zafi don rufin lantarki
SkivedFim ɗin PTFEya ƙunshi resin PTFE na dakatarwa ta hanyar yin gyare-gyare, gyare-gyare, sanyaya cikin komai, sa'an nan kuma yanke da mirgina cikin fim.PTFE fim yana da kyau kwarai dielectric Properties, tsufa-juriya, lalata juriya, harshen juriya, high lubrication da kyau kwarai sinadaran lalata juriya.
Zaɓuɓɓukan launi: Fari, Brown
Zaɓuɓɓukan kauri na fim: 25um, 30um, 50um, 100um
-
Tef ɗin Tissue na gefe Biyu mai hana Wuta don Canjawar Membrane
GBS mai hana wuta mai hana wutatef mai gefe biyuyana amfani da nama na bakin ciki azaman mai ɗaukar hoto da mai rufaffi biyu tare da mannen mannewa marar harshen wuta mara halogen kuma ya haɗa tare da takardar saki.Tare da mannewa mai ƙarfi da sassauci, ana amfani da tef ɗin nama mai hana wuta sau biyu akan gyare-gyare da haɗin kai na sauya membrane, daidaitawar baturi na lithium, gyara sashin insulation na thermal don injin mota.Hakanan za'a iya sanya shi tare da wasu kayan kamar Kumfa, EVA, PC, PP don saduwa da aikace-aikacen masana'antu daban-daban.
-
Tef ɗin Sublimation Mai Tsayin Zazzabi don Buga Sublimation na Tumbler
TheTef Sublimation mai jurewa zafian yi shi da fim ɗin polyester sannan kuma an rufe shi da mannen silicone mai girma.Tare da santsi mai laushi da babban rufi, mannen siliki mai ƙarfi mai ƙarfi yana da sauƙin mannewa ba tare da saura ba bayan kwasfa.Ana amfani da shi musamman don riƙe zanen gado a wurin yayin da ake jujjuyawa akan abubuwa iri-iri ciki har da mugayen yumbu, fale-falen fale-falen, plaques na lambar yabo na ƙarfe, T-shirts polyester, pads na linzamin kwamfuta.Zai iya rage raguwa bayan yin burodi da kuma cirewa mai tsabta yayin barewa.The sublimation tef ba kawai dace da sublimation a kan kofi kofuna, amma kuma dace da zafi canja wurin vinyl a kan T-shirts, matasan kai, tufafi, yadudduka, da kuma za a iya amfani da mafi yawan irin DIY ayyukan.
-
Poylimide Sublimation Tef Canja wurin Zafi don Ƙarfafawa akan Mugs Kofi, Sana'ar HTV akan Kayan T-Shirt
Thesublimation zafi tefan yi shi daga fim ɗin polyimide azaman mai ɗaukar hoto kuma an rufe shi da mannen silicone.Yana da sauƙi don tsayawa kuma ba sauƙin karya yayin bawo.Yana dacewa a cikin kewayon zafin jiki mai faɗi har zuwa 280°C (536°F).Yana ba da kyakkyawan juriya na zafi da sinadarai juriya, kuma yana da sauƙin kwasfa ba tare da barin ragowar ba.Ko da saman da bai dace ba ana iya naɗe shi cikin sauƙi da tef ɗin fasaha mai jure zafi.Tef ɗin canja wurin zafi yana aiki da kyau a cikin bugu na kofi, danna zafi, aikace-aikacen T shirt ko sauran bugu na canja wuri na thermal.
-
Fim ɗin Sakin Teflon FEP na gani na gani don DLP SLA 3D Printer
FEP fim(Fluorinated ethylene propylene copolymer) fim ne mai narke mai zafi wanda aka yi da resin FEP mai tsafta.Ko da yake yana da ƙananan narkewa fiye da PTFE, har yanzu yana kula da zafin sabis na ci gaba na 200 ℃, kamar yadda FEP ke da cikakken fluorinated kamar PTFE.Tare da sama da 95% watsa haske, FEP Film yana tabbatar da babban kwanciyar hankali na walƙiya UV don warkar da resin ruwa yayin duk aikin bugu.Ba itace ba kuma yana da kyawawan kaddarorin lantarki, babban kwanciyar hankali na sinadarai, ƙarancin gogayya, kyakkyawan yanayi na dogon lokaci da kyawawan kaddarorin zafin jiki.FEP Fim yawanci ana amfani da firintar DLP ko SLA 3D, kuma a sanya shi a cikin kasan VAT na bugu tsakanin allon UV ɗinku da na'urar ginawa ta 3D don ba da damar hasken UV ya shiga ya warkar da guduro.
-
Babban zazzabi polyimide lakabin canja wurin zafin jiki don bin lambar mashaya PCB
Mu polyimidehigh zafin jiki lakabinyana amfani da fim ɗin polyimide 1mil ko 2mil azaman mai ɗaukar hoto mai rufi tare da acrylic matsa lamba mai mannewa.Matte fari mai ɗaukar zafi canja wurin topcoat yana da sauƙin karantawa ga kowane nau'ikan lambobin mashaya da sauran bayanai masu mahimmanci.Yana iya jure gajeriyar babban zafin jiki har zuwa 320 ° da zafin jiki na dogon lokaci zuwa 280 °.Yana da kyakkyawan kwanciyar hankali na thermal, juriya mai ɗanɗano da kyakkyawar maƙallan farko, wanda za'a iya amfani da shi akan aikace-aikacen daban-daban kamar PCB Board tracking, sauran lambar lambar mashaya, kariya ta ƙasa da masking kamar mashin solder, sarrafa SMT, batirin lithium ko kariyar marufi. .
-
Nitto 903UL Skived PTFE Fim ɗin Tef don Juriyar Mask
Farashin 903ULwani nau'i ne na tef mai jure zafi wanda ke amfani da fim ɗin polytetrafluoroethylene (PTFE) da aka bi da shi azaman tallafi kuma an rufe shi da mannen silicone mai girma.Yana da kauri iri hudu kamar 3.1mi, 5.2mil, 7.1mil, da 9.1mil tare da max nisa 450mm.Nitto 903 PTFE fim tef ne UL510 bokan da kyau kwarai harshen juriya da low gogayya, wanda za a iya smoothly manne, winded, banded ko shãfe haske a kan daban-daban surface ko abubuwa.
-
Nitto 973UL Glass Cloth PTFE Tef don Injin Marufi
Farashin 973ULyana amfani da Gilashin Gilashi azaman goyan baya kuma an haɗa shi da polytetrafluoroethylene (PTFE) watsawa sannan kuma an haɗa shi.Tare da shafi na silicone m, Nitto 973UL tef yana da kyakkyawan aiki a cikin juriya na zafi da juriya na sinadarai.Yana da nau'ikan kauri guda uku waɗanda sune 5.12mil, 5.91mil, da 7.09mil, abokin ciniki na iya zaɓar kauri daidai gwargwadon aikace-aikacen daban-daban.An nuna shi tare da ƙarfin ƙarfi mai ƙarfi da dorewa, Nitto 973UL yana da kyakkyawan aiki yayin da ake amfani da marufi da na'ura mai ɗaukar zafi.